Portable acoustic sound absorbing panel “SHIZUKA-SDM”
Hello, this is Mr.I of Shizuka Co., Ltd..
Today`s article is about our new sound absorbing panel “SHIZUKA-SDM”
※original article in Japanese (日本語の記事)
This is an introduction movie of our latest acoustic sound absorbing panel “SHIZUKA – SDM” released in 2018.
Sound absorbing panel “SHIZUKA-SDM” for the first public release at InterBee 2018
It was first released at “InterBee2018” held in Makuhari Messe in November 2018. Until now, “SHZIUKA Stillness Panel (SSP)” was our only acoustic panel . However, while maintaining the sound absorbing performance of SSP, SDM was able to develop with lightweight and easy to carry specifications.
Sound absorbing panel suitable for recording in home environment
When mastering and recording, it is common sense to record in a full-fledged studio, but now people who record in your home or in the office are increasing. However, since the reverberation is not calculated in a general building structure, full-scale recording can not be done. This product will be able to change such space to the optimum recording site.
The size is 900 mm in width x 1800 mm in height and is close to the height of men. The weighing is 7 kg, so you can carry with your hand. Also, it can be folded in half, so you can put it into your car and carry everywhere. You can stand upright by folding it at right angles.
It is possible to reduce echo sound even by only one sheet, and you can configure a simple recording booth by placing multiple pieces around the desk. If you are recording in a soundproof room with high sound insulation performance, you can further pursue sound quality if you place this SHIZUKA – SDM.
Ideal for articulation and sound adjustment of the audio room
It is also recommended for professional job sites such as mastering and recording, as well as those who pursue the sound of audio. The original sound of the audio has been disturbed by irregular reflection of the wall and the ceiling being arranged and it has disappeared. Therefore, in pursuit of the original sound of the audio it is required to remove irregular reflection (flutter echo).
Also, since the adjustment of the sound is also possible, it is not a complete removal of the reverberation but it can also pursue the sound of your preference. Improvement of indoor environment is possible by installing it on the corner of the room if it is the back of the audio and bass booming.